welding machine

Geomembrane welding machine is our new developed products, which can weld geomembrane of different thickness and are applicable

1. Technical parameters

Voltage (V): 220V

Frequency (Hz): 50Hz

Power (P): 750W

Welding speed (V): 0.5-5m/min

Heating temperature (T): 0-450°C

Thickness of material to be welded: 0.2mm-1.5mm

Overlap width: 100mm

Welding width: 12.5mm×2, interior cavity 12mm

Seam strength: ≥85% base material (tensile resistant in shear direction) ,complete machine

Weight: 5Kg

Insulation class: class II

2. Precautions

1). For correct operation, please carefully read this instruction.

2). Use with grounded 3-cords mains cable and socket (socket with 10A capacity. On the corresponding welder, phase L connected to live wire, N to zero line, phase to grounded protection line), plug will not be modified without prior permission.

3). For good welding quality, please assign specified personnel for operation.

4). Pressure roller will not engage on free running.

5). Do not operate when it is exposed to water to prevent inferior quality.

6). The machine has been regulated before leaving factory. Please do not adjust it at will.

7). Circuit board in control box is live with electricity, do not remove it without prior notice to authorized personnel.

8). Preheat for 30 minutes before start up if machine has been long unused or exposed to moisture.

9). Modifications may be made for continuous improvement, without prior notice.

welding machine